email: info@quad-solutions.co.uk

Hot Water Cylinders

Hot Water Cylinder Installation & Replacement in Surrey & Hampshire

A reliable hot water cylinder is essential for any home with a stored-hot-water system, providing a reserve of hot water for baths, showers, and taps throughout the home. Whether your existing cylinder has failed, is no longer providing adequate hot water for your household, or you’re upgrading to an unvented system for better pressure, Quad Plumbing Solutions provides professional hot water cylinder installation and replacement across Surrey and Hampshire.

Our fully qualified and insured engineers are experienced in installing both vented (low-pressure) and unvented (high-pressure) hot water cylinders. We cover Guildford, Aldershot, Farnham, Farnborough, Fleet, Camberley, Ash, Normandy, Tongham, and all surrounding areas.

Vented vs Unvented Hot Water Cylinders

Vented Cylinders: A vented (or indirect) cylinder is fed by a cold water storage tank in the loft and relies on gravity pressure. These are the traditional system found in many older Surrey and Hampshire properties. They are simple and reliable, but the water pressure at outlets is limited by the height of the water tank above them — which can result in relatively low pressure at some fixtures.

Unvented Cylinders: An unvented cylinder is connected directly to the mains cold water supply, operating at mains pressure. This delivers higher pressure hot water throughout the property — comparable to the cold water pressure at your taps — which makes it ideal for thermostatic shower systems, bath fillers, and multiple simultaneous outlets.

Unvented cylinders must be installed by a qualified engineer holding a current G3 qualification. Our engineers hold the relevant qualifications for unvented cylinder installation throughout Surrey and Hampshire.

Signs Your Hot Water Cylinder Needs Replacing

Signs that your hot water cylinder may need replacing include:

  • Rust-coloured or discoloured hot water
  • A persistent metallic taste or smell in the hot water
  • Visible corrosion on the cylinder body or connections
  • The cylinder is leaking (even slowly — this will worsen over time)
  • Insufficient hot water for the household’s needs
  • The cylinder is more than 15–20 years old and suffering repeated problems
  • The immersion heater is failing repeatedly
  • Excessive heat loss from the cylinder (indicating a failed or deteriorated insulation jacket)

Hot Water Cylinder Replacement — What to Expect

Cylinder replacement involves isolating the water supplies, draining down the cylinder, disconnecting and removing the old unit, positioning and securing the new cylinder, reconnecting all pipework and controls (including the safety thermostat, temperature and pressure relief valves, and immersion heater if applicable), refilling and commissioning the system, and checking all connections for leaks.

The work typically takes a full day for a straightforward replacement. If the system is being upgraded from vented to unvented, additional pipework modifications and pressure reducing valve installation will be needed.

All cylinder installations include providing the relevant commissioning documentation and, for unvented cylinders, the Building Regulations notification.

Frequently Asked Questions

Other Services We Offer

Why Choose Quad Solutions

Outstanding Reputation

We've built our reputation one job at a time across Surrey. Our customers regularly recommend us to friends and neighbours, and our consistent 5-star Google reviews reflect the standard of work we deliver on every visit — from a single tap repair to a full bathroom plumbing fit-out.

Exceptional Client Service

We're easy to reach, honest about costs, and respectful of your home. We turn up when we say we will, explain clearly what needs doing and why, and we don't leave until the job is done right. No jargon, no surprise charges, and no mess left behind.

Reliable and Trustworthy

When you invite a tradesperson into your home, trust matters. Quad Plumbing Solutions is a fully insured, family-run business with over 25 years in the trade. We work to the same high standard whether it's a small repair or a larger installation project.

Decades of experience

With more than 25 years of hands-on plumbing experience across Surrey, we've seen and solved every type of plumbing problem. That depth of experience means faster diagnosis, fewer return visits, and repairs that last — saving you time and money.

Highest Plumbing Standards

We take pride in doing the job properly the first time. All work is carried out to current plumbing standards using quality materials and proven techniques. We don't cut corners — because a plumbing repair done correctly shouldn't need doing again.

bespoke range of products

We source quality fixtures and fittings to suit your home and budget, from everyday replacement parts to premium bathroom and kitchen products. If you have a specific product in mind, we're happy to fit it — or we can recommend reliable options based on our years of experience.

Highly Rated by Local Customers

We are proud of our excellent reputation and 5-star customer feedback. Our customers value our reliability, professionalism, and high-quality workmanship.

We aim to deliver the same outstanding service on every job, no matter how big or small.